Memory for:
• Acer
• Apple
• Dell
• Fujitsu-Siemens
• Gateway
• HP/Compaq
• IBM
• Lenovo
• Sony
• Toshiba
» more…
RAM memory features for Apple Mac Pro DDR2 (Early 2008):
 |
 |
|
|
|||
|
Supports DDR2: PC2-6400 3 compatible memory modules Capacities from 2GB to 8GB
|
Any combination of Kingston's 2, 4, and 8GB kits can be installed to reach configurations up to 32GB. | |||||
 |
 |
|
|
Kingston part numbers for Apple Mac Pro DDR2 (Early 2008):
PC2-6400 DDR2 800MHzKTA-MP800K2/2G: 2GB 800MHz FBDIMM Kit
KTA-MP800K2/4G: 4GB 800MHz FBDIMM Kit
KTA-MP800K2/8G: 8GB 800MHz FBDIMM Kit
Technical Information for Apple Mac Pro DDR2 (Early 2008): | | | | | | |||||||||||||
| bank schema: 2GB Standard:
|
| ||||||||||||||||
| | | | | |
|
 |
|
|
Memory must be installed in pairs. Apple recommends four or eight identical DIMMs for best performance. Kingston offers memory in kits of two identical DIMMs. Base memory 2GB (2x1GB) are installed as follows: 1GB on Memory Riser A (top card) and 1GB on Memory Riser B (bottom card). When upgrading move 1GB from Riser B bottom card to DIMM slot 2 on Riser A top card. Install the first pair of additional DIMMs on the bottom card in DIMM slots 1 and 2. The second pair of additional DIMMs install in top card DIMM slots 3 and 4. Install third pair of additional DIMMs in bottom card DIMM slots 3 and 4. |
||
|
|
Note: The "Bank Schema" describes the original memory configuration of this device, as well as the sockets available for upgrade.
Electronic Engineering Keywords: Find, DDR2, PC2-6400, 800MHz, DDR2-800, 2GB, 4GB, 8GB, Upgrade, Apple, Mac Pro, Mac Pro DDR2 (Early 2008), MA970LL/A, Kingston, Compatible, RAM Memory